56-62 Corvette Power Steering System

$2,445.00
(No reviews yet) Write a Review

1956-62 Corvette Power Steering System

IS A COMPLETE QUICK RATIO 2.5 TURNS LOCK TO LOCK-POWER ASSIST- POWER STEERING SYSTEM. BOLT-ON SYSTEM THAT CAN BE UNBOLTED FOR FUTURE JUDGED CARS.  WITH THE SHORT RATIO 2.5 TURNS-(just like the RPO quick-steering adapter option for Racing applications originally available from Chevrolet for 1956-62 corvettes)-V.S. (3.5 TURNs stock-corvette LOCK TO LOCK) MAKES FOR HI-PERFORMANCE STEERING
-ELIMINATES NEED FOR LARGE DIAMETER ORIGINAL STEERING WHEEL.
-ALLOWS FOR WIDER PROFILE RADIAL TIRES. -SAVES "VERY VALUABLE" STEERING BOX COMPONENTS DUE TO POWER ASSIST FEATURE TAKING THE LOAD OFF THE STEERING BOX.
INCLUDES: THE NEW ^ASSSEMBLED SYSTEM-SYSTEM II --

$1995 WITH REBUILT RAM AND RELAY ASSEMBLIES
+ *THIRD ARM EXCHANGE FOR $225 CORE CHARGE
+ * PITMAN ARM EXCHANGE FOR $225 CORE CHARGE = $2,445 total w/ core charge. + $65 ups in U.S.A.
we will refund $450 core fee --when pitman and the third arm are returned.
We have been selling this system for 8 years. Many systems install by Corvette Mike's Anaheim, and The Corvette Shop San Diego.
*ADAPTER BRACKETS, LINK, Special P.S HOSES, + ASSEMBLED System. see listing of kit below.
PACKING LIST: 1. Pitman Arm - loose
2. RESERVOIR BOTTLE + CAP W/ MOUNTING BRKT. W/ HOSE + FITTINGs (2) 90 degree and 1 -U-shape + CONNECTORs
3. PUMP W/PULLEY
4. PUMP W/ SUPPLY FITTING INSTALLED.
5. CLAMPS
6. RAM BRKT W/THRU BOLTS -1/2"dia. sleeves+ nuts and washers.
7. Hi-PRESSURE HOSE INSTALLED IN PUMP W/FITTINGS
8. 2 PULLEYS - one water pump pulley w/(spacer reinforment-included if needed) and one crank pulley.
9. 1-REAR GROOVE DRIVER BELT #15335 Goodyear - FOR Rear GROOVE OF THE 2-GROOVE PULLEYS 10. MOUNTING BRKT FOR RESERVOIR BOTTLE
11. ASSEMBLED CRANE-LINK-3RD ARM-PITMAN-RAM- ASSEMBLY
12. PUMP MOUNTING PLATE WITH BOLTs and 2-spacers for back of plate
13. Steering stop bracket w/ 2 holes drilled.
14. 3rd Arm w/ tapered hole bolted to adapter Brkt (w/tapered holes for tie rods.
15. 5/8" ID -supply hose + return hose.
16. INSTRUCTIONS\
notes: flex hoses install RH to RH in up viewed position. color coded.
LH TO LH in up viewed position. color coded The Straight FITTINGS GO IN the RAM
45 DEGREES FITTINGS IN CONTROL VALVE.